Okay, so here's the deal. My family and I are all n00b's to the dsm world, I got all of them in on loving 1g's. So what's wrong? Here's the story- my brother came to pick me up from work the other day in my mom's 1992 laser and as we were heading back down the interstate the oil light came on and oil pressure gauge buried on low, we pulled over and shut off the car. We got out and looked and saw nothing wrong. Got back in, tried to start, it started and started making a noise under the hood like "clank clank clank" (kind of hard to explain it, but thats pretty much what it sounded like) He shut it back off quickly and we got out again looked under the hood and...BAM..oil had exploded everywhere, we though we had through a rod or crankwalked or even blew the turbo, looked under it, all 4.8 quarts of oil on the ground. So me and my dad tore into it yesterday, checked the trubo, it was fine, but thats all we checked because that's what we thought the main problem was because there was no holes in the block or rods through it anywhere, and the oil was all over the turbo heat shield anyway. got it all apart, no shaft play?Then My dad noticed the oil filter had oil all over it and he went to clean it off and it spun freely with the touch of a finger. So today we got new oil filter, anti-freeze, and oil and put in it. Got everything put together and bolted back up,tryed to start, it started and started going "clank clank clank" again. We were pretty mad at this point because we had no clue. We tried to start it again and it would crank, but would not hit a lick. So this is where I need help, is it out of time? Is it blown up? What is wrong with my 4g63? Please add anything if you think its helpful! I don't no the problem here, and don't know what else it could be. Haven't checked the timing yet, so maybe that's it? I don't know, because as I said, we're all n00bs.
![]()



LinkBack URL
About LinkBacks
Then My dad noticed the oil filter had oil all over it and he went to clean it off and it spun freely with the touch of a finger. So today we got new oil filter, anti-freeze, and oil and put in it. Got everything put together and bolted back up,tryed to start, it started and started going "clank clank clank" again. We were pretty mad at this point because we had no clue. We tried to start it again and it would crank, but would not hit a lick. So this is where I need help, is it out of time? Is it blown up? What is wrong with my 4g63? Please add anything if you think its helpful! I don't no the problem here, and don't know what else it could be. Haven't checked the timing yet, so maybe that's it? I don't know, because as I said, we're all n00bs.

Reply With Quote



